Pjama Vibrating Alarm Reminder Watch
Couldn't load pickup availability
A modern and stylish wrist watch with a vibrating alarm to be used for discretely reminding the wearer to go to the toilet, empty the bladder, take medication, drink water, turn up for appointments, or other important matters. You can set up to 15 reminders every day.
The watch will simply vibrate at the time set, allowing the wearer to take action without anyone knowing what the alarm was for.
The Pjama vibrating alarm watch displays the time like any normal watch. The silicon bracelet is soft and smooth and can be adjusted to fit any wrist.
The watch has a timer function that can be set from 1 to 180 minutes, as follows; 1, 5, 10, 15, 20, 30, 45, 60, 90, 120, 180.
CHOOSE BETWEEN 4 COLOURS
- Black
- Pink
- Light Blue
- Dark Blue
TECHNICAL SPECIFICATIONS
- Shows the time as AM and PM
- 40mm diameter watch face
- Smallest watch wrist circumference 120mm
- Largest watch wrist circumference 190mm
- Band 15mm wide
- Durable plastic watch face
- Power source DC 5V
- Charging Input micro USB
- Outside temperature 0 to 45 degrees C.
SIMPLE TO USE
- Press the Time/Alarm button once to show the time.
- Press the Time/Alarm button 4 times to see the time setting of the first alarm (A1).
-
The vibration can be stopped immediately by pressing a button, or it will stop automatically in 60 seconds.
- Press the Time/Alarm button twice to check the charging of the battery (from 0 to 100 percent).
CHARGE THE WATCH
Remove the watch from the rubber case and connect the watch USB port to your power bank (5V) or laptop. With the USB cable attached, a blue light will flash indicating it is charging. When the watch is 100% fully charged the blue indicator light will always be on. A fully charged watch lasts 6-15 days.
FAQ's
Pjama Watch FAQ's
HOW TO SET THE TIME?
- When the screen is black, press the top Time/Alarm top button to see the current time
setting.
- When the time is showing, hold down the Time/Alarm button until the hours are flashing.
- Press the top Time/Alarm button to increase the hours and the bottom Timer button to
decrease the hours.
- When the hours are correct, hold down the top Time/Alarm button until the minutes are
flashing.
- Press the top Time/Alarm button to increase the minutes and the bottom Timer button to
decrease the minutes. When the correct time is shown, wait 5 seconds until the screen turns off. The time is now set.
HOW TO SET THE ALARMS (UP TO 15 ALARMS)?
- When the screen is black, press the top Time/Alarm button
4 times to see the time setting of the first alarm (A1).
- With the time showing, hold down the top Time/Alarm button
until the hours are flashing.
- Press the top Time/Alarm button to increase the hours and
the bottom Timer button to decrease the hours.
- When the hours are correct, hold down the top Time/Alarm
button until the minutes are flashing.
- Press the top Time/Alarm button to increase the minutes
and the bottom Timer button to decrease the minutes.
- When the correct time is shown, wait 5 seconds until the
screen turns off. The time of the first alarm is now set.
- The time setting of the second alarm (out of 15 alarms) is
reached after pressing the top Time/Alarm button 6 times, third alarm after 8
times, forth alarm after 10 times and so on.
HOW TO CHECK IF THE ALARM IS ON OR OFF?
To check if the first alarm is off or on, when the screen is black, press the top Time/Alarm button 5 times.
To check if the second alarm is off or on, when the screen is black, press the top Time/Alarm button 7 times.
To check if the third alarm is off or on, when the screen is black, press the top Time/Alarm button 8 times.
And so on…
HOW TO ACTIVATE/DEACTIVATE THE ALARM?
- To activate or deactivate the first alarm, when the screen is black, press the top Time/Alarm button 5 times. Before the screen turns off, hold down
the top Time/Alarm button for 3 seconds to toggle between alarm on (A1 ON) oroff (A1 OFF). When the correct setting is shown, wait 5 seconds until the
screen turns off and the activation/deactivation of the alarm is saved.
- The activation/deactivation of the second alarm is reached
after pressing the top Time/Alarm button 7 times, third after 9 times, forth after 11
times and so on.
HOW TO SET THE TIMER?
- When the screen is black, press the bottom Timer button
twice to set the timer. Cdn will be displayed after the first press and at the second press the number of minutes is shown that the timer will be set to. Keep
pressing the Timer button until the desired number of minutes are displayed (from 1 to 180 minutes).
- Hold down the bottom Timer button for 3 seconds and “On” is displayed indicating that the timer is activated.
HOW TO SEE THE REMAINING TIME OF THE TIMER?
To see the remaining time on an activated timer, when the screen is black, simply press the bottom Timer button.
HOW TO TURN OFF THE TIMER
To turn off the timer, first press the bottom Timer button when the screen is black and the countdown time is displayed. Then, hold down the Timer button for 5seconds.“ Off” is displayed indicating that the timer is off.